YJQ-W7Q Pneumatic Crimping Tool

Среднее (Всего голосов: 0) 0.0
510 $
Добавить в корзину

Цзясин Jingrui Инструмент & Equipment Co., Ltd, расположенный в зоне развития Jiaxing, которая занимается проектированием, изготовление точного инструмента, инструментов, плесень и т.д...

Адрес: Китай, Цзясин, , -
Факс: +86-573-82326019
E-mail адрес:
Skype: Precisetool2
Компания: Jiaxing Jingrui Instrument&Euqiment Co.,Ltd
Артикул: Q2
Цена: 510 $
Город: Цзясин
Категория: Другое


1. YJQ-W7Q is widely used for the crimping of wires and contacts in electronic connectors.

2. Wire crimp range: 16 AWG (1.32 mm²) to 28 AWG (0.32mm²).

Contacts Range:16-22AWG


1. The crimping tool adopts curve propulsion mechanism, its applied force transfers through four curves in the head cavity of the right plier handle to the four indenters. The four intenders do the centripetal linear motion, which makes its front-end teeth crimp the contact to complete the crimping process. The cycle controlled precision ratchet assures the consistency of impression and the crimping quality of wires and contacts.

2. Ratchet and rack match up the self-locking mechanism ensure the accordance of each crimping. Lack of air pressure or short of air supporting time will cause the tool not be able to crimp properly, the press mould can not return to the correct place because of the self-locking mechanism. By adjusting air pressure or increase the air supporting time, the press mould will arrive to the correct place, the problem can be solved.

3. This crimping tool has eight working selections. Firstly, take out the locking pin, lift up the select knob and rotate, make sure the pointer align with the desired selection, then put down the select knob, start crimping the contacts.

4. Hand switch and foot treadle are two optional working ways (can not use together). To swift working ways, 1.5MM hexagonal wrench should be used. Adjust the M3 hexagon socket screw on the back of the crimper, which the arrow point to. Back out the screw until feel elastic force when press the hand switch, it is under hand switch working ; Screw in until feel no elastic force when press the hand switch, it is under foot treadle working. Please note: adjust the screw with slight strength.


1.Do not crimp any hard steel material or not matched size contacts, please contact us if the tool get stuck by improperly use.

2. Working air pressure: 80-120 P.S.I. Max air pressure: 120P.S.I.(5.5-8.3BAR)

Отзывы покупателей

Реклама на n4.biz