Nickel Neodymium Disc Magnet

Disc Ø 8.0 x 8.0 mm N35SH Nickel Neodymium Magnet

Model Number: N35SH NI

Type: Permanent Composite: NdFeB Magnet Shape: magnet segment

Application: Industrial Magnet working temperature: 80 deg celsius Application: de motor, servo motor, medical etc

Coating: Nickle SIZE: R195*46MM

Wide range of Grades available- from N35 to N52;

Density: 7.4 -7.6 g/ cm3;

Hardness: 600 {Hv};.

•Neodymium magnets are the most powerful commercially produced magnets.

•NdFeB magnets have a higher Maximum Energy Product, (BH).max, which can easily reach 30 MGOe and even goes up to 50 MGOe.

•NdFeB magnets can replace SmCo magnets in most cases, especially where operating temperature is less than 80 degrees Centigrade.

•Very high strength.

•Relatively low cost.

•Compared to Alnico and SmCo magnets, relatively easy to machine.

Quick Leads

•Manufacturing process - sintering (most common), injection molding, and compression bonding.

•Shapes available - blocks, bars, discs, rings, cylinders, arc segments, or irregular shapes, etc.

•Wide range of Grades available- from about 3330 to 5311. (First 2 digits represent BH.max, and second two digits represent Intrinsic Coercivity, Hci.)

•Density: 7.4 -7.6 g/ cm3; Hardness: 600 {Hv}

•Some particular grades can achieve 200°c the max working temperature.

•Saturation magnetizing field required - about 35kOe

•Machining - Neodymium magnets should be machined by grinding using diamond wheels, however, of the hard magnet materials, Neo magnets are the least difficult to machine. We can

successfully machine very small magnets.